https://operationdarkhorse.com/2013/06/26/framing-part-1/https://operationdarkhorse.com/wp-content/uploads/2013/05/img_3068.jpghttps://operationdarkhorse.com/wp-content/uploads/2013/05/img_3067.jpghttps://operationdarkhorse.com/wp-content/uploads/2013/05/img_3066.jpgLaying out the sill plates. I ran the sill plate long over the door opening in the masonry so that I could continue the stud layout unbroken and would be able to lift the wall section in place without too much difficulty and torquing of the wall. I will cut the extra length of sill plate out once the wall is in place.https://operationdarkhorse.com/wp-content/uploads/2013/05/img_3059.jpgFirst sections of wall in placehttps://operationdarkhorse.com/wp-content/uploads/2013/05/img_3058.jpgFraming material delivered to sitehttps://operationdarkhorse.com/wp-content/uploads/2013/04/img_3077.jpgTemporary wall bracing... certainly not OSHA complianthttps://operationdarkhorse.com/wp-content/uploads/2013/04/img_3076.jpgAttaching the second top plate to tie the walls together2013-06-26T00:27:49+00:00monthlyhttps://operationdarkhorse.com/2013/05/01/zoning-and-permitting/https://operationdarkhorse.com/wp-content/uploads/2013/04/faroe-islands-videy-island.jpgFaroe-Islands-Videy-Island2013-05-01T17:44:25+00:00monthlyhttps://operationdarkhorse.com/contact/https://operationdarkhorse.com/wp-content/uploads/2013/04/img_6930-21.jpgIMG_6930 2https://operationdarkhorse.com/wp-content/uploads/2013/04/bw1.jpgBW2013-04-26T17:03:22+00:00weekly0.6https://operationdarkhorse.com/resources/2013-04-25T11:24:09+00:00weekly0.6https://operationdarkhorse.com/posts/2013-04-25T11:19:54+00:00weekly0.6https://operationdarkhorse.com/2013/04/24/slab-demolition-and-pouring-the-new-slab/https://operationdarkhorse.com/wp-content/uploads/2013/04/garageslab001.jpgGarageSlabSketchSketch showing the slab edge detail. https://operationdarkhorse.com/wp-content/uploads/2013/04/img_6638-2.jpgIMG_6638 2Wind-driven water might make it past the garage door seal, but it won't make it up the 1/2" lip. The exposed anchor bolt indicates the location of the future course of CMU block yet to be laid. The studio floor slopes 1/4" per foot from the back wall to the front garage door. Therefore, at the front, the CMU will sit on a formed curb. https://operationdarkhorse.com/wp-content/uploads/2013/04/img_6632.jpgIMG_6632https://operationdarkhorse.com/wp-content/uploads/2013/04/img_6605.jpgIMG_6605Sub-slab rigid insulation with 3/8" rebar 24" o.c.https://operationdarkhorse.com/wp-content/uploads/2013/04/img_6604-2.jpgIMG_6604 2https://operationdarkhorse.com/wp-content/uploads/2013/04/img_6602-2.jpgIMG_6602 2Highest point in Minnesotahttps://operationdarkhorse.com/wp-content/uploads/2013/04/img_6595-2.jpgIMG_6595 2https://operationdarkhorse.com/wp-content/uploads/2013/04/img_6582.jpgIMG_6582Saving the rubble for my future landscaping projectshttps://operationdarkhorse.com/wp-content/uploads/2013/04/img_6570.jpgIMG_6570Slab demolition2013-04-24T14:48:18+00:00monthlyhttps://operationdarkhorse.com/2013/04/17/clearing-the-site/https://operationdarkhorse.com/wp-content/uploads/2013/04/site-clearing-1.jpgSite Clearing 12013-04-22T23:47:26+00:00monthlyhttps://operationdarkhorse.com/2013/04/17/demolition-3/https://operationdarkhorse.com/wp-content/uploads/2013/04/existing-2.jpgExisting 2https://operationdarkhorse.com/wp-content/uploads/2013/04/existing-1.jpgExisting 1https://operationdarkhorse.com/wp-content/uploads/2013/04/demo-11.jpgDemo 11https://operationdarkhorse.com/wp-content/uploads/2013/04/demo-10.jpgDemo 10https://operationdarkhorse.com/wp-content/uploads/2013/04/demo-9.jpghttps://operationdarkhorse.com/wp-content/uploads/2013/04/demo-6.jpgDemo 6https://operationdarkhorse.com/wp-content/uploads/2013/04/demo-5.jpghttps://operationdarkhorse.com/wp-content/uploads/2013/04/demo-4.jpghttps://operationdarkhorse.com/wp-content/uploads/2013/04/demo-3.jpghttps://operationdarkhorse.com/wp-content/uploads/2013/04/demo-2.jpgCutting through the roof sheathing and rafters2013-04-18T17:35:23+00:00monthlyhttps://operationdarkhorse.comdaily1.02013-06-26T00:27:49+00:00